As a Systems Administrator, I deal with Raid 1(mirroring) pretty much exclusively. Hell, nowadays when building a server the server automatically mirrors your Operating System disks for you, which means that you do not even need to understand what is happening behind the scenes. You just pop your two drives in your server and go. However the world of the San Administrator is much more complicated.
First off its important to know that RAID stands for either “Redundant Array of Independent Disks”, or less commonly “Redundant Array of Inexpensive Disks”. Either way you slice it (pun intended) the basic idea of RAID is to combine multiple hard disks to either increase performance or increase redundancy.
Before I get started its important to introduce the term LUN. A LUN is a logical disk that consists of raw physical
disk space. LUNs are created as a basic part of the storage provisioning process. They are presented across a SAN to a server as a single physical disk.
Note that the title of this article is “Raid Levels Explained and Simplified“, and when I say simplified I mean it. I am going to give a brief overview of most of the common RAID levels and then present a weakness and strength. Scroll down to the bottom of the article for links to more in depth articles and web pages.
RAID 0: Striped…No Fault Tolerance
OK, in my opinion, and in the opinion of many other, RAID 0 is not even RAID, because there is no redundancy. If a disk fails, you are toast. Basically your take a slice of two disk or more disks and create a LUN. For example lets say that you as the Sysadmin request 1 80GB disk from your local SAN Admin. In the scenario below your SAN guru would carve 8 10GB blocks and present them in order (block 1,2,3,4,5,6,7,8) to you as a single LUN. RAID 0 provides good read and write performance. In the end RAID 0 is striping which is the most important thing that you probably need to know about it.