Install and Configure SNMP on the Asus RT-AC66U Router

ASUS_RT-AC66U_newsOk first off let me start by saying that this is probably the coolest piece of home computing hardware that I have ever laid my hands on. Yes the setup was easy, and yes the thing is rock solid, and yes wireless range is awesome. But for approx $200 USD you really should not expect anything less.  I’m not going to go into its specs or features, as I’ll leave that to the professionals. Read up on it here.

Anyway out of the box it supported telnet, but I wanted ssh, so I dropped the default firmware and went with Asuswrt-Merlin. It was at this point I started to explore the Busybox OS and decided I wanted to monitor the device via my HomeLab Zenoss install.

However, much to my chagrin net-snmp was not installed out of the box.

So how do you install it you ask? Would you believe via a package manager?

First, you need to find the package name

#ipkg list | grep snmp

Then install the snmp package

#ipkg install net-snmp

Then configure it to start at boot time.

#app_set_enabled.sh net-snmp yes

In order to configure it, you are going to have to search for the snmp.conf

#find / -name snmpd.conf

I found two files and one of them clearly states that you should not edit it directly. The other one does not so this is the one that I modified to include my custom rocommunity. See below.

rocommunity  lab

Now I just need to figure out how to allow port 161 udp/tcp on my local LAN segment and I am in business. However, I will probably tackle that tomorrow.

 

Additional Info (2016)

Note, you can restart snmp as shown below.

Stopping:

admin@RT-AC66U:/tmp/home/root# app_stop.sh net-snmp
killall: dm2_transmission-daemon: no process killed
killall: asus_lighttpd: no process killed
killall: dm2_snarfmaster: no process killed
killall: dm2_nzbget: no process killed
killall: dm2_amuled: no process killed
iptables: No chain/target/match by that name
iptables: Bad rule (does a matching rule exist in that chain?)

Starting:

admin@RT-AC66U:/tmp/home/root# app_set_enabled.sh net-snmp yes
The field(Enabled) was set “yes” already.
Restarting the package…

 

2016 Update – Configuring SNMP via the WebUI

Figured that I would add an update to this post as it seems that there are plenty of folks who are looking to setup SNMP on their Asus routers. Note that SNMP can now be configured directly from the WebUI.

In the left pane, click on “Advanced Setting”. Then click on the “SNMP” tab. See example below. Note that the webui does not seem to pick up your configuration if you have configured it via the cli. I have not tested to see if the WebUI overwrites the CLI configuration or if it creates another configuration file.

asus-4.png

Additional Resources

Fatmin: How to Add a Static Route on the Asus RT-AC66U

Fatmin: Install and Configure SNMP on the Asus RT-AC66U