HomeLab: Simple Cisco EIGRP Setup

Sugar_skull_by_nickgo79EIGRP (Enhanced Interior Gateway Routing Protocol), is a Cisco proprietary routing protocol (until recently). When a router runs EIGRP, it keeps a copy of its neighbors routing table. If I router cannot find a route it its, or its neighbor's routing table, it will query its neighbors who in turn query their neighbors.

Exactly how routing protocols work is serious business, but dont worry we are not going to go into that here. Below is the process that I used to setup EIGRP on a Cisco 2811.

Before we do anything, lets get into Configuration mode (conf t).

r-2811-1#conf t

 

Your first step is going to be to enable IP Routing on your device. But before you do so, make sure that you have configured a Gateway of Last Restort. I did not and had to hook up the old console cable.

The IP of this router is 10.1.0.2, and its directly connected to 10.1.0.1, which is its last resort first hop, so lets configure that .

r-2811-1(config)#ip route 0.0.0.0 0.0.0.0 10.1.0.1

 

Ok so now lets enable IP Routing

r-2811-1(config)#ip routing

 

Now lets start EIGRP and chose an AS number. Note that I used 10 on the other three routers in my setup so thats what we are going to use here.

r-2811-1(config)#router eigrp 10

 

Now we need to tell the router what networks are connected to it (or in this case, will be connected to it). This is the information that the router will share with its neighbors.

r-2811-1(config-router)#network 10.3.0.0

 

In this instance my ourside interface is on 10.1.0.0/16, and its inside interface will serve up 10.3.0.0./16.

Dont forget to save your work

r-2811-1#copy run start

 

Related articles

HomeLab: Simple SSH Setup on a Cisco Router
HomeLab: Cisco 2621 Router Password Recovery/Factory Reset
Hour 40: OSPF the new advanced link-state protocol
Route Redistribution: Protocol Rules + EIGRP Redistribution
Eigrp
Hour 31: IGP Review EIGRP

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s